VX power packs the best value for money of any power supply by Aerocool. It is the best choice for budget system builders offering the most suitable spec, reliable quality, silent 12cm fan, and black powdercoated casing

Aerocool VX-600 ATX PSU
ATX12V 2.3
Over Power Protection
Under voltage protection
Short Circuit Protection
Power Saving Mode Supported
The most valuable power supply for entry-level system builder.

Compatible with ATX 12V 2.3.
High-end SECC with black coating casing.
Silence 12cm fan with smart fan speed control.
Support C6/C7 power saving mode on Intel Haswell CPU.
Powerful single +12V rails offer the most compatible DC output to support high-end graphic card and CPU.
Long cable length at least 450mm supports high-end case with “Bottom” PSU position.

OPP/OVP/UVP/SCP electrical protection included:

Over Voltage Protection: The +5V/+12V/+3.3V DC output are protected against the over voltage condition. Maximum value can’t be over 6.5V at 5V terminal and 15.5V at 12V, 4.3V at 3.3V.
Over Power Protection: The power supply will be shutdown and latch off when output power is 105%~150%.
Under voltage protection: In an under voltage fault occurs, the supply will latch all DC outputs into a shutdown state when +12V,+5V & +3.3V outputs under 60% of it’s maximum value.
Short Circuit Protection: Short circuit placed on +5V,+12V,+3.3V,-12V will latch off. +5VSB will auto-recovery

Specification

Cables:

1 x 20 + 4 PIN
1 x 4 + 4 PIN
3 x 4 PIN
4 x SATA
1 x FDD
2 x 6 + 2 PIN

Power Specifications:

AC Input: 230VAC 6A 47-63Hz
DC Output:Max Current/Wattage

+3.3V: 20A/120W
+5V: 17A/120W
+12V: 46A/552W
-12V: 0.3A/3.6W
+5Vsb: 2.5A/12.5W
Total Combined Wattage: 600W

Environmental Requirements:

Operating / Storage Temperature Range:

Operating ambient: 0ºC min ~ +40ºC max
Non operating ambient: -20ºC ~ +60ºC

Humidity (non condensing):

Operating ambient: 10% ~ 90% relative humidity
Non operating ambient: 5% ~ 95% relative humidity

Altitude:

Operating ambient: 0 to 10,000 ft
Non operating ambient: 0 to 50,000 ft

Noise Level Output:Loading(%) / Noise (dBA)

20% / 19.2dBA
40% / 20.7dBA
60% / 24.0dBA
80% / 28.0dBA
100% / 31.7dBA