Fractal Design Kelvin T12 Water Cooling Unit, Black | FD-WCU-KELVIN-T12-BK
Simple to install, silent operation, powerful performance and easy expandability define the Kelvin Series. The silent high-performance ceramic pump is strong enough to support considerable expansion, should you decide to include GPU blocks and/or additional radiators in the same loop.
The Kelvin Series water cooling systems are constructed from enthusiast class components. Both the CPU block and the radiator are made from pure copper, for maximum performance and an increased product life span with zero maintenance required.
All modern CPU sockets are supported by the versatile, easy-to-use mounting kit.
Fantastic cooling performance
The strong pump and the full-copper construction places the Kelvin Series water cooling system ahead of the pack in cooling performance.
Pump resistor included for the ability to optimize the system to a lower noise level, while maintaining impressive performance levels
Dynamic GP-12 PWM fans for quiet operation with significantly large airflow
Wide PWM speed range, 500-2000 RPM, providing accurate and better fan speed control with quieter operation
Expandable system. Just open it up to get the full benefits of custom water cooling, with the ability to add any components you want to the loop, such as a graphics card cooler.
High pressure pump allows strong water flow rates even when an additional CPU or GPU water block or an additional radiator has been added to the loop.
Standard G 1/4″ thread fittings for compatibility with the vast majority of enthusiast water cooling products.
The tubes are fastened with two-part brass fittings, providing a secure seal while being easy to open and re-seal with a standard wrench.
Easy refilling with dedicated fill port. Extra strong fill port that can be accessed by hand, with an allen key or with a coin for easy durable handling.
Made with enthusiast-grade components developed in cooperation with Alphacool
Highly reliable ceramic bearing pump, with custom tuned maximum RPM for the optimal balance between performance and noise level
made with a revolutionary copper/nylon radiators
Full copper CPU Water block design featuring strategic jet plate improvements
Avilable in many radiator configurations
Available with a triple fan radiator, a 30mm thick 360, providing a much larger area than nearly all other pre-filled water cooling units
Also available in the two most common formats: thin 240mm and thick 120mm
Long lifetime. The performance of most pre-filled water cooling systems degrade quite significantly over time, because of galvanic corrosion and water loss.
Galvanic corrosion occurs over time when two metals with different galvanic potential (such as aluminum and copper) are in contact. It can be slowed with anti-corrosion additives in the water, but the best way to maintain performance over time is to use metals with similar galvanic potential. The Kelvin Series water cooling system is constructed with pure copper in both the radiator and the water block, along with brass fittings.
To avoid the common issue of most pre-filled water cooling units (that tend to lose performance over time due to water loss in the tubes), Fractal Design equipped the Kelvin series with a fill dedicated port.
Block/pump assembly measurements: 69*69*40 mm
Tubing Measurements: 320mm long, 11mm outer and 8mm inner diameter
Fitted with anti-kink coils for worry-free installation
Kelvin T12 Radiator Measurements: 46*132*163 mm
Thread class for fill port and all tube fittings: G 1/4″
Supported sockets:Intel: 775,1150,1151,1155,1156,1366,2011,2011-v3;AMD: AM2,AM2+,AM3,AM3+,FM1,FM2,FM2+
Fans included: 2 pcs
Fractal Design Zero™ Thermal Paste ;1 g syringe, sufficient for multiple mountings
Colors Available: Black
Net weight -Base unit only, not including mounting or fans: 1.1 kg
Net weight – Dynamic GP-12 PWM fan, per fan: 159 g
Net weight – Total excluding packaging and manual. Includes fans, mounting kit for all platforms, cooling paste (including packaging for the cooling paste) and adapter cable: 1.7 kg
Package dimensions – W x H x D:350*250*151 mm
Package weight: 2.4 kg
Fractal Design Dynamic GP-12 PWM fan
500 – 2000 RPM
Max air flow: 87.6 CFM
Max pressure: 2.30 mm H2O
Acoustical noise: 32.2 dB(A)
DC 12V, 0.20A
Maximum water flow: 72 l/h
Maximum pressure: 1.0 m H2O
Acoustical noise: 25.0 dB(A)
DC 12V, 0.27A
Fractal Design Kelvin T12 pre-assembled Water Cooling Unit
2 Fractal Design Dynamic GP-12 PWM controlled fans
Intel 775,1150,1151,1155,1156,1366 mounting hardware (including back plate)
Intel 2011,2011-v3 mounting hardware
AMD AM2,AM2+,AM3,AM3+,FM1,FM2,FM2+ mounting hardware
PWM splitter cable
Low speed cable for pump (9V)
Fractal Design Zero™ Thermal Paste, 1g Syringe
Long and short radiator mounting screws
10 in stock
|Dimensions||150 × 150 × 10 cm|
FD-WCU-KELVIN-T12-BK / #15331
Only logged in customers who have purchased this product may leave a review.