HyperX Fury 8GB (1 x 8GB) 64-bit DDR4 2666MHz DRAM CL16 1.2V 288-pin DIMM Desktop Memory, Single Module (Black) | HX426C16FB2/8

د.إ394.00

HyperX HX426C16FB2/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V.

HyperX FURY DDR4 automatically recognises the platform it’s plugged into and automatically overclocks to the highest frequency published, up to 2666MHz, for hassle-free, plug-and-play functionality. It delivers automatic top-level performance for motherboards featuring Intel’s 100 series and X99 chipsets and complements Intel’s 2, 4, 6, 8 and 10-core processors for faster video editing, 3D rendering, gaming and AI processing. Available in speeds from 2133MHz–26666MHz, CL14–16 latencies and capacities of 4GB, 8GB and 16GB single modules and 8GB–64GB kits.

Optimised for Intel’s 200 series and X99 chipsets – plug it in and you’re good to game

Cost-efficient high-performance DDR4 upgrade

At 1.2V, low power consumption compared to DDR3

Stylish, low-profile heat spreader in signature FURY asymmetrical design

• Power Supply: VDD = 1.2V Typical• VDDQ = 1.2V Typical• VPP – 2.5V Typical• VDDSPD = 2.2V to 3.6V• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals• Low-power auto self refresh (LPASR)• Data bus inversion (DBI) for data bus• On-die VREFDQ generation and calibration• Single-rank• On-board I2 serial presence-detect (SPD) EEPROM• 16 internal banks; 4 groups of 4 banks each• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)• Selectable BC4 or BL8 on-the-fly (OTF)• Fly-by topology• Terminated control command and address bus• Height 1.340” (34.04mm), w/o heatsink

CL(IDD)

16 cycles

Row Cycle Time (tRCmin)

45.75ns(min.)

Refresh to Active/Refresh

350ns(min.)

Command Time (tRFCmin)

Row Active Time (tRASmin)

29.25ns(min.)

Maximum Operating Power

TBD W*

UL Rating

94 V – 0

Operating Temperature

0o C to +85o C

Storage Temperature

-55o C to +100o C

10 in stock

SKU: HX426C16FB2/8 Categories: , ,

Additional information

Weight 0.07 kg
Dimensions 150 × 150 × 10 cm
Brand

HyperX

Model No.

HX426C16FB2/8 / #20364

Weight

0.07 Kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.