HyperX HX430C15PB3/8 is an 1G x 64-bit (8GB) DDR4-3000 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS
•JEDEC: DDR4-2400 CL17-17-17 @1.2V
•XMP Profile #1: DDR4-3000 CL15-17-17 @1.35V
•XMP Profile #2: DDR4-2666 CL15-17-17 @1.35V

FEATURES
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP – 2.5V Typical
• VDDSPD = 2.25V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.661” (42.20mm)

CL(IDD)
17 cycles

Row Cycle Time (tRCmin)
45.75ns(min.)

Refresh to Active/Refresh
350ns(min.)

Command Time (tRFCmin)

Row Active Time (tRASmin)
32ns(min.)

Maximum Operating Power
TBD W*

UL Rating
94 V – 0

Operating Temperature
0o C to +85o C

Storage Temperature
-55o C to +100o C