Shuttle Barebone XPC nano | NC01U5
Good value, small and powerful
With the NC01 Series, Shuttle introduces its first Mini-PC with less than 600 ml in volume. These small computers are powered by Intel’s highly efficient “Broadwell” ULV processors ranging from Celeron up to Core i7. This barebone can be equipped with up to 16 GB of DDR3L memory, one M.2 (2242) SSD card and one 2.5″ storage drive (HDD or SSD). It also comes with a vast array of connectivity options such as HDMI, Mini-DisplayPort, USBs, LAN, WLAN-AC, COM port, Audio and an SD card reader. This makes it the ideal platform for applications such as digital signage, POS, Kiosk, Thin Client, Cloud Computing, Office PC and Multimedia.
ChassisBarebone PC with a black plastic chassisDimensions: 141 x 141 x 29 mm (LWH) = 577 mlWeight: 0.36 kg net, 1.26 kg grossHole for Kensington LockIncludes vertical stand and 75/100mm VESA mount
Low Power ConsumptionPower consumption in idle mode: 7 W, full load: 20 / 31 W (without/with graphics)(measured with 2x 4 GB DDR3L-1600 SO-DIMM, 64 GB 2.5″ SSD, Windows 7 64 bit)
Operation SystemThis barebone system comes without operating system.It is compatible with Windows 7 / 8.1 / 10and Linux (e.g. Ubuntu, OpenSUSE, Fedora)Supports 32- and 64-bit.
ProcessorModel: Intel i5-5200U (ULV)System-on-a-chip architecture (SoC): no chipset requiredCode name: Broadwell (5th Generation Intel Core)Cores / Threads: 2 / 4Clock rate: 2.2 GHz, up to 2.7 GHz in Turbo modeL1/L2/L3 Cache: 128 kB / 512 kB / 3072 kBMemory controller: DDR3L-1600 Dual Channel (1.35V)TDP wattage: 15 W maximumManufacturing process: 14 nmMaximum Tjunction Temperature: 105°CIntegrated Intel HD graphics 5500 engineSupports 64 Bit, VT-x, VT-d, AVX, AVX2, AES-NI, Enhanced SpeedStep, NX bit, SSE 4.1/4.2
Integrated GraphicsIntel HD graphics 5500Two digital audio/video ports: Mini-DisplayPort 1.2  and HDMI 1.4aClock rate: 300~900 MHzExecution Units (EU): 24Supports one Ultra HD / 4K display running at 3840 x 2160 (2160p) resolutionMax. frame rate with Ultra HD resolution: 60 Hz via DisplayPort, 30 Hz via HDMISupports two independent screens at 2560 x 1600 resolutionSupports DirectX 11.2, OpenCL 1.3/2.0, OpenGL 4.3Supports full AVC/VC1/MPEG2 hardware decodingSupports HD video plus multi-channel digital audio via a single cableDynamic, shared memory: up to 1632 MB
Mainboard / BIOSSupports resume after power failureSupports Wake on LAN (WOL)Supports Power on by RTC AlarmSupports booting from USB devices and SD card readerAMI BIOS in 8 MByte EEPROM with SPI interfaceSupports hardware monitoring and watch dog function (ITE 8528E)Supports Unified Extensible Firmware Interface (UEFI)
Power AdapterExternal 65 W power adapter (fanless)Input: 100~240 V AC, 50/60 Hz, max. 1.6 AOutput: 19 V DC, max. 3.42 A, max. 65 WDC Connector: 5.5/2.5mm (outer/inner diameter)
Memory support2x 204-pin SO-DIMM slotSupports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35VSupports Dual Channel modeSupports a maximum of 8 GB per DIMM, maximum capacity: 16 GBSupports two unbuffered DIMM modules (no ECC)Caution: This mainboard does only support 1.35V DDR3L memory modules.Note: DDR3L has a lower operation voltage as DDR3
Slot for M.2 SSDM.2 slot: (NGFF) type 2242, key MSupports M.2 SSD card, key B+M, dimensions 22 x 42 mm, Serial ATA interfaceCaution: SSDs with PCIe interface (M key only) are not supported
AudioAudio Realtek® ALC 269Q-VC3 High-Definition Audio Codec3.5mm / 4-pole combo audio connector for headphones and microphone Digital multi-channel audio output: via HDMI and Mini-DisplayPort
Gigabit LANIntel i218LM PHY connected to the MAC of the processorSupports 10 / 100 / 1.000 MBit/s operation (Gigabit)Supports WAKE ON LAN (WOL)Supports network boot by Preboot eXecution Environment (PXE)
Wireless Network (WLAN)WLAN expansion card (M.2- 2230-AE) with two internal antennasChip: Realtek RTL8821AESupports Wireless LAN IEEE 802.11b/g/n/ac 1T1R, 2,4 GHz or 5 GHzMax. speed: 150 Mbps (2.4 GHz) or 433 Mbps (5 GHz)Supports Bluetooth 4.0
2.5″ Drive BaySupports one Serial ATA hard diskor one SATA SSD drive in 6.35cm/2.5″ formatDevice height: 7 mm (max.)Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidthNote: no Serial ATA cable is required
Card ReaderIntegrated SD card readerSupports SD, SDHC and SDXC memory flash cardsGenesys Logic GL823-OGY08 with USB interfaceSupports booting from SD card
Front Panel connectors2x USB 3.0 (both support 2.0 A charging)SD card reader (supports SD, SDHC, SDXC)Power buttonPower LED (blue, blinking in suspend mode)HDD LED (orange)
Back Panel connectorsMini-DisplayPort 1.2 HDMI 1.4a2x USB 2.0Gigabit LAN (RJ45)Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) DC-input connector for external power adapter
Left Side connectorsSerial RS232 COM port (D-Sub, 9-pin)
Supplied AccessoriesMulti-language user guideDriver DVD for WindowsVESA mount set (made of steel, with screws)Stand for vertical operation modeBracket for a 2.5″ drive with screwsPower adapter with AC power cord
Optional Expansion Kits:(available from Q1’16 on request)1) Graphics: AMD R7 M370 “Litho XT”2) I/O box: 1x Gigabit LAN, 2x USB 2.0, 1x 2.5″ bay (SATA 6G)3) I/O box: 3x RS232 COM port, 1x 2.5” bay (SATA 6G)
TPM (Optional)Only available upon request:Trusted Platform Module (TPM) supports TPM 1.2 or 2.0 specifications
Environmental SpecOperating temperature range: 0~50°C Relative humidity range: 10~90% (non-condensing)
Conformity/CertificationsEMI: FCC, CE, BSMI, C-TickSafety: CB, BSMI, ETLThis device is classed as a technical informationequipment (ITE) in class B and is intended for use inliving room and office. The CE-mark approves theconformity by the EU-guidelines:- EMV-guideline 89/336/EWG electromagnetic tolerance- LVD-guideline 73/23/EWG use of electric deviceswithin certain voltage-limits
10 in stock
|Dimensions||150 × 150 × 10 cm|
NC01U5 / #12776
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.